mini round baler forza

When you hear “Forza mini round baler?”, many people immediately imagine just a compact machine for small farms. But there is a nuance here that is often missed: miniature itself is not a panacea. The key thing is how is this mini? implemented in specific field conditions, especially on our, not always flat and dry lands. I’ll say right away that we’ll talk about experience working with equipment fromHulunbuir Machinery Manufacturing Company ?Jiujia?, whose websitecn-fascar.ruwell known to those who are looking for integrated solutions for the agricultural sector. The company positions itself as a modern full-cycle enterprise - from development to service, which, however, requires verification in practice.

The “mini” concept: where it works and where it doesn’t

So, Forza in the ?Jiujia? is an attempt to capture the segment of small farms or those who need agility. But here's what's important: ?mini? here it doesn’t mean “simplified”. The design of the press retains key components from larger models, the same principle of roll formation with variable pressure. I saw how some colleagues expected the device to be extremely lightweight, almost garden-grade. But in reality, the frame is reinforced, the pressing chamber is full. This, on the one hand, is a plus for durability, on the other hand, it requires an adequate tractor-tractor. For low-power "oldies" at 25-30 hp may be at the limit, especially with a wet mass.

In practice, the ideal scenario formini round baler Forza- these are areas of up to 20-25 hectares with heterogeneous terrain, where a large unit cannot turn around. For example, working on slopes or between garden rows. But here comes the first stumbling block - the pick-up system. The working width is about 1.2 meters, this is enough for narrow swaths, but if the windrow is placed carelessly or knocked down by the wind, you will have to make additional passes, losing the benefit of maneuverability. I myself saw how, at one of the farms near Moscow, the operator swore at exactly this - he actually had to “finish it off”. felling manually, which negated the time savings.

Another point that is rarely voiced in specifications is the dependence on the type of culture. On alfalfa, especially in the first cutting, Forza performs well and forms a dense, even bale. But problems began with the stale, rough-stemmed forbs: the knives sometimes couldn’t cope, and the winding had gaps. I had to experiment with density settings and movement speed. This is about the question of “complete intellectual production”, which is declared by?Jiujia?. Intelligence is in the settings, but no one has canceled the basic laws of agricultural physics.

Components and assemblies: what to look for when purchasing

If we considerForza baleras an investment, then disassembly is required. Let's start with the bale chamber and winding. The classic chain drive and belt drive of the wrapper are used here. Reliable? In general, yes. But there is a peculiarity: the chain requires more frequent tension control than, say, the gear drive of some European analogues. After the first 50-60 hours of operation, we noticed a slight play and had to tighten it up. Service team fromcompany ?Jiujia?It worked quickly, but the fact is that additional attention is needed.

Film or mesh wrapping system. Here the manufacturer offers a standard option with a roll of film. The filling mechanism is relatively simple, but there is a subtlety: the winding control sensor sometimes “does not see” the beginning of the film if it has moved a little. Not critical, but requires the presence of an operator. I know a case where a couple of rolls were missed because of this - they then turned around during transportation. The solution was found by installing a homemade guide roller - the problem is that such modifications should not be mandatory for new equipment.

Chassis and hitch. The axle is on rolling bearings, the wheel diameter is sufficient for soft ground. But here is the hook for hanging... It is universal, under category 1, but during intensive work on uneven surfaces, the finger gradually became loose. I advise you to immediately install a thicker safety pin or even switch to a mount with a lock. This is not a criticism of Forza specifically, but rather a common problem with many mini-presses, but it must be taken into account.

Seasonal Operation: Observations and Rakes

The first full season with Forza is always a litmus test. We installed it on a Belarus 320 tractor (about 35 hp). There was enough power, but fuel consumption was higher than expected - apparently due to the fact that they were pressed at maximum density. Here, by the way, the density adjustment scale fromHulunbuir Machinery Manufacturing Company ?Jiujia?- it is intuitive, but the scale is graduated conventionally. It was necessary to set it for each crop using a trial method: for cereals - closer to the maximum, for legumes - to the average value.

A problem that many have encountered is the sticking of mass on the pick-up teeth in dew or after rain. Cleaning every two hours is still a pleasure. The design does not provide a simple hinged flap for access, as on some Dutch models. I had to stop and take a crowbar. This is an obvious miscalculation in ergonomics, which should be discussed with the manufacturer. On the websitecn-fascar.ruin the ?service? section You won’t find such nuances, of course.

But what pleased me was the quality of the roll itself. With the correct settings, it turned out dense, with smooth edges, and held its shape well even when stored in the open air for a week or two. This indicates the correct geometry of the pressing chamber. For small-scale livestock farming that declares itself as the target audience?Jiujia?, this is critically important - less losses, better food safety.

Service and support: promises and reality

The company's stated integration of ?research, production, sales and service? checked when something breaks. In our case, it was necessary to replace the bearing on the pick-up shaft (stone hit). Contacted through the website. There was a reaction: the manager responded promptly, the part was sent from a warehouse in the Moscow region. But here are the deadlines... We waited 8 days. For the height of the season, this means downtime. On the other hand, the replacement instructions came detailed, with photos, and we did it on our own. Conclusion: the service network in the regions is still rather weak, count on “tomorrow?” not worth it. You need to have a basic supply of consumables.

Another aspect is consultations on settings. Call the technical linecompany ?Jiujia?gave the result: the engineer sensibly explained how to adjust the pressure depending on humidity. It's valuable. It is felt that behind the product there is not just an assembly shop, but some kind of development. But again, such consultations should be routine, not the exception.

As for the warranty, there is a standard 12 months. But it’s important: the warranty covers manufacturing defects, and not, for example, torn film due to improper filling. Read the contract carefully. Our experience is that there were no complaints about the key components (chamber, drive), but the wrapper had minor adjustments under warranty, they did it without any questions.

Results: who should look towards Forza

So is it worth taking?mini round baler Forza? To summarize my experience and observations of colleagues - yes, but with clear conditions. This is a good choice for a farmer with an area of ​​up to 30-40 hectares who values ​​maneuverability and works with different crops. For large monoculture fields, it is, of course, not a competitor to large linear presses.

The key advantage is precisely the balance of size and functionality. An agricultural holding does not need it, but for a family farm with a couple of tractors it is very much so. Especially if the farm has a livestock sector, where the accuracy of the roll and the ability to work in areas near the farm are important.

ProductsHulunbuir Machinery Manufacturing Company ?Jiujia?, presented oncn-fascar.ru, represented by Forza, is an attempt to occupy its niche. The technology is not without its problems, but the problems are understandable and solvable. It requires the operator to understand the process, not just press a button. If you are ready to delve into, adjust and deal not with an “ideal robot”, but with a working tool, then Forza can become a reliable assistant. The main thing is to approach without illusions, with an oil can and a set of keys at hand. As, indeed, with any other equipment in our difficult field work.