used pick-up press for sale

When you search online for “used pick-up press for sale”, it seems like there are a lot of options. But in reality, most of the ads are either resellers who do not understand technology themselves, or units that have already served their purpose and will soon fall apart. Many people think that buying used is just about saving money. In fact, it is primarily a matter of proper assessment and understanding what to look for. I went through this myself more than once.

The main pitfalls when choosing used equipment

The first thing you encounter is the condition of the bale chamber and flattening rollers. Photos in advertisements often show clean, almost new equipment. You arrive at the place, and there are piles of rust inside, worn out belts, hydraulics are leaking. The condition of the pick-up and wrapping mechanism is especially critical for round pick-ups. If the bale forming unit is broken, repairs will cost a pretty penny, and all savings will be lost.

The second point is origin. They often sell equipment imported from Europe. The quality there may be higher, but spare parts... It’s not easy to find analogues here for all models. Therefore, I always first check whether consumables are available on the market: belts, bearings, brushes, knives. If this is a rare model, it is better to refuse the purchase, no matter how attractive the price looks.

And the third pitfall is the seasonality of demand. In spring prices forused balertake off, fall in the fall. But in the fall they sell what has worked for the season and may have hidden problems. The ideal time to buy is winter, when there is time for a quiet inspection and possible repairs. But it depends on your luck with the offer.

Experience and case studies from the field

I remember how a few years ago I bought what seemed to be a good roll press. It worked for me for one season, but in the second I started having constant problems with the winding. The bales were falling apart. It turned out that the problem was a worn-out mesh tension mechanism. The part is non-standard, I had to order it for production, wasting time. Conclusion - when inspecting, you need to not just turn it on and listen, but be sure to check the operation of the entire cycle: picking, pressing, tying/winding - at idle, with a simulated load.

Another important nuance is the type of farming for which the equipment was used. Ifbalerworked on large flat fields, wear and tear will be one thing. If in hilly areas, with small areas where there are constant maneuvers and loads on the frame, it’s completely different. I always ask about this and especially carefully inspect the chassis and welds on the frame.

Where and how to look for worthwhile options?

Specialized sites are good, but the best options are often found through friends in professional communities. A farmer who has used equipment himself and sells it to renew his fleet is the most reliable seller. He's talking about all the "sores" will tell you, and the documents are most likely in order.

Now many people are paying attention to companies that not only sell new equipment, but also deal in refurbished equipment. For example, if we takeHulunbuir Machinery Manufacturing Company ?Jiujia? (https://www.cn-fascar.ru). This is a modern integrated enterprise in the field of agriculture. Although they are primarily known for their new developments, I know from experience that such serious players often have a clear understanding of the used equipment market. They see which models are the most durable and which nodes most often cause problems. Their website can be a useful source of information for comparing features and understanding what modern equivalents are capable of.

You should never neglect the opportunity to see equipment at work, in the field. If the seller refuses to demonstrate a working cycle with real weight, this is a red flag. It’s better to spend time on the road than to spend months repairing a “successful” one. purchase.

What to look for during a personal inspection?

1. Oil and hydraulics. I check the level and condition of the oil in the gearboxes and hydraulic tank. Cloudy oil and metal shavings on the dipstick are signs of active wear. I listen to the hydraulic pump for any extraneous noise under load.2. Belts and chains. All belts on the baler and pick-up must be free of cracks and have a strong shine from wear. Chains - without elongated links, with adequate tension.3. Electrics and braiding mechanisms. Contacts, sensors, wiring - everything must be dry and free of oxides. In rotor or chamber units, I check needle bearings and guides for play.

The condition of the towbar or hitch is often overlooked. It seems like a small thing. But if it is “stumbled”, this indicates harsh use and possible hidden deformations of the frame.

Final thoughts: Is it worth it?

Purchaseused baleris always a compromise and calculation of risks. For a small farm or for performing specific tasks, this may be the only economically feasible solution. The key is careful inspection and understanding that you are not just buying a unit, but its operating history and potential future investment.

Personally, before purchasing, I always mentally add 15-20% to the asking price for possible immediate repairs and replacement of consumables. If even with this premium the price looks adequate compared to a new or well-restored device, then you can consider the option. If not, it’s better to continue searching or consider other options, for example, pay attention to full-service companies like the one mentioned?Jiujia?, where you can get a comprehensive solution and a clear understanding of what you will get in the end.

Ultimately, the success of a transaction does not depend on luck, but on the amount of time spent on evaluation and the willingness to move away from the seemingly “sweet” at any moment. offers. Equipment should work and be profitable, and not become an eternal project in the workshop.