Trailed mower at MTZ: new release 2026, price from the manufacturer 

Trailed mower at MTZ: new release 2026 - a direct response to a request for price and characteristics

Trailed mower at MTZ new release2026 is a high-tech aggregated equipment designed for mowing grass, grains and legumes and then placing them in a windrow or scattering. The key difference between the current year’s models is the integration of adaptive hydraulic terrain following systems and reinforced gearboxes designed to work in difficult operating conditions with tractor power from 80 to 150 hp. For agricultural enterprises and farms, this means reducing crop losses to 3-5% by minimizing the cut height and increasing the penetration speed to 12-14 km/h.

Currentprice from the manufacturerfor basic models starts from 480,000 rubles (the equivalent in currency depends on the exchange rate of the Central Bank of the Russian Federation on the date of shipment), however, the final cost is formed individually based on the configuration: the presence of an air conditioner in the tractor cabin (requires a separate hydraulic line), the type of cutting device (finger-segment or disk) and the working width. In this material, we will analyze in detail the technical innovations of the 2026 release, conduct an economic analysis of the cost of ownership and give engineering recommendations for choosing equipment that will really pay for itself in one season of intensive work.

Design evolution: what has changed in the 2026 models

The agricultural machinery market does not stand still. If just five years ago the standard practice was to use simple mechanical drives, thentrailed mower at MTZ new releasewhich we present demonstrates the transition to hybrid control systems. Engineers at the manufacturing plant took into account more than 200 requests from service centers over the previous year, which made it possible to eliminate bottlenecks in the design.

Reinforced frame and shock absorption system

The main problem with trailed mowers when working on uneven fields is the dynamic loads on the tractor frame and hitch. The 2026 release uses 09G2S steel with a profile thickness of 6 mm in critical components (previously St3 steel with a thickness of 5 mm was used). This increased the frame life by 40%. In addition, a dual-circuit depreciation system has been introduced:

• Pneumatic dampers:dampen vertical vibrations during transportation and operation at speeds above 10 km/h.
• Hydraulic compensators:ensure constant pressing of the cutting bar to the soil, eliminating the “bouncing” of the mower, which leads to grass skipping or damage to the blades on the ground.

Upgraded cutting device

The heart of any mower is the cutting unit. New models use a system for quickly replacing segments without special tools. The knives are made of wear-resistant Hardox 450 steel, which allows you to work in areas with a high content of sand and small stones without frequent sharpening. The angle of attack of the knives is optimized by mathematical modeling of crop flows, which reduces energy consumption by 15% while maintaining cut quality.

It's important to note thattrailed mower at MTZ new releasewhich is equipped with an automatic lubrication system for knife drive chains. This eliminates the human factor: the operator no longer needs to maintain friction units daily; it is enough to check the oil level in the central reservoir once every 50 operating hours.

Technical characteristics and compatibility with MTZ tractors

To select the equipment correctly, you need to understand the compatibility parameters. Not every tractor can effectively pull a wide-cut mower. Below are the main technical data of the flagship model of the KP-2026 series (similar in characteristics to the 9GD-2.5 models produced by Jiujia), which is most in demand in the medium-sized agribusiness segment.

Please note: for tractors of the MTZ-80/82 series with a classic layout, it is recommended to use models with a working width of up to 2.5 meters to avoid overloading the rear axle and loss of controllability. For more powerful machines, such as MTZ-1221 or MTZ-1523, versions with a grip of 3.2–3.5 meters are optimal. Using an overly wide mower on a weak tractor will cause the wheels to spin and the clutch to wear out quickly.

Pricing: what makes up the cost in 2026

The price question is one of the most frequently asked questions when searching for “trailed mower at MTZ new releaseprice." It is important to understand that the industrial equipment market does not operate on the principle of fixed price tags in a supermarket. The cost is formed based on several factors, which we will now analyze in detail so that you can adequately evaluate commercial offers.

Basic cost vs Equipment

The base price listed on price lists usually includes the bare machine: frame, cutterbar, drive shaft and standard attachment. However, real operation requires additional options:

• Hydraulic lifting of the cutterbar:+45,000 rub. Allows you to lift the mower over obstacles (rocks, molehills) directly from the cab without stopping.
• Set of transport wheels with brakes:+32,000 rub. Critical for safety when traveling on public roads over 5 km.
• Reinforced driveshaft with high-strength bearings:+18,000 rub. Recommended for working on slopes and hilly terrain.
• Set of spare knives and fasteners (starter package):+12,000 rub. Saves time during the first maintenance.

Logistics and regional coefficients

Shipping costs also have a significant impact on the final budget. Direct deliveries from manufacturers such as Jiujia, which have experience in exporting to Russia and their own logistics channels, are often more profitable than purchasing through intermediaries. Even taking into account logistics from China or border zones, the absence of dealer margins (which averages 20-30%) makes direct purchase economically feasible.

Seasonality and discounts

Engineering experience suggests: the best time to buy is winter or early spring (February-March). During this period, manufacturers offer discounts of up to 10-15% to load production lines. Buying during the peak season (May-June) is fraught not only with overpayment, but also with long waiting times for shipment.

Comparative analysis: Pull-mounted vs mounted mower

Buyers often doubt which type of aggregation to choose. To clarify the situation, let’s compare the new trailed models with traditional mounted mowers, which are also popular for MTZ tractors.

Engineering verdict:If your fields have an area of more than 50 hectares and relatively flat terrain,trailed mower at MTZ new releasewill be significantly more efficient due to its greater working width and speed. For small farms (up to 30 hectares) with difficult terrain and small plots, the mounted version is better suited.

Application scenarios and cost-effectiveness calculations

To understand how beneficial it is to introduce new technology, let's consider two real-life use scenarios. Calculations are based on average indicators for Central Russia for the 2025 season.

Scenario 1: Harvesting hay for a dairy complex (500 heads)

Task: to mow 200 hectares of perennial grasses in optimal agrotechnical terms (5-7 days).

• Technique used:MTZ-1221 + Trailed mower 3.2 m.
• Operating speed:10 km/h.
• Work shift:10 hours of pure time.
• Daily output:10 km/h * 3.2 m * 10 h = 32 hectares (including turns and technological stops, coefficient 0.8, total ~25 hectares/day).
• Completion date:200 ha / 25 ha/day = 8 days.

If we use the old model with a width of 2.1 m, the production will be ~16 ha/day, and the period will increase to 12-13 days. In unstable weather conditions, these 4-5 days can be decisive: the risk of exposure to rain increases, which deteriorates the quality of the hay (protein loss, molding). The quality of feed directly affects milk yield. Losses from deterioration in the quality of feed for 500 heads can amount to hundreds of thousands of rubles, which many times covers the difference in price between an old and a new mower.

Scenario 2: Farm (50 ha, mixed crops)

Task: mowing oats and vetch-oat mixture.

• Technique used:MTZ-82 + Trailed mower 2.5 m.
• Feature:Presence of stones on the field.

The key factor here is the reliability of the new cutting unit. Thanks to the free-moving system of the knives and reinforced springs, when hitting an obstacle, the knives are deflected without breaking. On old equipment, downtime due to replacing a broken knife or repairing a drive could take 2-3 hours. In the new release, changing a knife takes 15 minutes. Over the course of a season, time savings on repairs amount to up to 20-30 engine hours, which is equivalent to an additional 20-25 hectares of harvested area.

How to choose a supplier and avoid mistakes when purchasing

The market is filled with offers, but not all of them are of equal quality. Search for "trailed mower at MTZ new release» can bring you to the sites of resellers who sell last year’s equipment under the guise of new. Here is a checklist to check the reliability of the supplier:

1. Manufacturer status check:Request a dealer certificate or manufacturer's proof of eligibility. For example, the products of the Jiujia company are accompanied by a full package of export documents and have international certification ISO 9001, which confirms the legality of origin and quality of assembly.
2. Availability of service support:Find out if there is a spare parts warehouse in your area. For the new 2026 model, the availability of consumables (knives, belts, bearings) in stock is critical. If the supplier says “2 weeks on order,” this is a risk of downtime during the season.
3. Warranty conditions:The standard warranty for agricultural machinery is 12 months or 500 operating hours. Note the exclusions: Often the warranty will not cover the blades and belts, but should cover the gearboxes and frame.
4. Possibility of test drive:A serious manufacturer or large dealer will provide the opportunity to demonstrate the operation of the machine in your field or test site. Refusing a test is a red flag.

Typical mistake when choosing:Focus only on price. Cheap analogues from unscrupulous sources often use Chinese analogues of bearings and low-quality steel for knives. Saving 50 thousand rubles on a purchase can result in a loss of 200 thousand rubles on repairs and downtime.

Maintenance and operation: advice from an engineer

Even the most advanced equipment requires proper care. Totrailed mower at MTZ new releaseserved for a long time, observe the following rules:

Daily maintenance (before the start of the shift)

• Visual inspection of the integrity of the knives and fastening bolts. The play of the knives should be free, but without play in the fingers.
• Checking the tension of the drive belts. The sagging should not exceed 10-15 mm when pressed by hand.
• Lubricating the propeller shaft joints. Use only lithium greases recommended by the manufacturer.
• Cleaning the cutting device from sticking grass and dirt. The stuck mass creates imbalance and vibration.

Seasonal storage

At the end of the season, the mower must be thoroughly washed, dried and treated with an anti-corrosion compound on all metal surfaces. It is recommended to remove the knives, sharpen them and store them in a dry place, or leave them in place, but generously lubricate them with preservative oil. The driveshaft should be disconnected and stored horizontally to avoid deformation.

Important Note:Do not store the mower outdoors without a cover. UV radiation destroys rubber seals and tires, and moisture causes corrosion even on painted surfaces.

FAQ: 2026 Pull Mower Frequently Asked Questions

Q: Is the new mower compatible with my old MTZ-80?
A: Yes, it is compatible, but with limitations. For MTZ-80, a working width of no more than 2.1–2.5 meters is recommended. Be sure to check the serviceability of the PTO and the condition of the rear linkage. For comfortable work, it is desirable to install additional counterweights on the front axle of the tractor.

Q: What is the optimal cutting height?
A: For most grasses the optimal height is 50-70mm. A cut that is too low (less than 40 mm) increases the risk of damage to the turf and soil getting into the feed, and also accelerates wear on the knives. Cutting too high reduces yield.

Q: Can I mow wet grass?
A: Technically yes, but not recommended. Wet grass is heavier and sticks to the cutting device, creating an increased load on the drive. This leads to overheating of the gearbox and breakage of the belts. If you have to work in dew, reduce the speed and clean the device more often.

Q: How much do replacement blades cost for the 2026 model?
A: The price of one knife varies from 800 to 1500 rubles, depending on the type of steel. A set for one section (usually 7-8 knives) will cost 6-10 thousand rubles. Considering the knife resource is 300-500 hectares, the cost of consumables is minimal.

Q: Do I need to register a trailed mower with the traffic police?
A: If the mower has its own brakes, lights and self-propelled vehicle passport (PSM) or is registered as a trailer, then registration may be required when driving on public roads. However, most agricultural trailed implements weighing up to 3.5 tons do not require separate registration with the State Traffic Safety Inspectorate, but must be equipped with “Large Vehicle” signs and reflectors during transportation. Check requirements in your region.

Conclusion and recommendations for purchasing

Investing in modern technology is a strategic decision.Trailed mower at MTZ new release2026 is not just a tool for mowing grass, but an element of a precision farming system that allows you to maintain the quality of feed and increase the overall efficiency of the farm. We see a clear trend towards increasing reliability and ergonomics: manufacturers such as Jiujia listen to farmers and remove unnecessary complications, adding the necessary strength and intelligent control systems.

Don't delay modernizing your fleet. Each season of working on outdated equipment means direct losses from downtime and crop losses. Choose trusted manufacturers with a confirmed export history and availability of service support, demand guarantees and do not skimp on service.

If you are ready to discuss a specific package for your tasks, receive an individual cost estimate taking into account logistics to your region, or request drawings for approval by the chief engineer, contact us right now.

Remember: the right choice of equipment today is a guaranteed harvest tomorrow. Trust professionals, choose quality confirmed by GOST and real reviews from agronomists.